Skip to content
Get Sample
Get Sample
Smoothing Glass or Mirror Edges

Smoothing Glass or Mirror Edges

Smoothing Glass or Mirror Edges: A DIY Guide with eQualle Sandpaper

Smoothing Glass or Mirror Edges: A DIY Guide with eQualle Sandpaper

Introduction

Smoothing sharp or rough edges on glass or mirrors is an essential step to ensure safety and achieve a professional finish. Using eQualle 9x11" sandpaper sheets, you can carefully sand down these edges for a smooth, polished result. Follow this guide to learn how to safely and effectively sand glass or mirror edges.

Why Smooth Glass or Mirror Edges?

  • Safety: Prevent cuts or injuries caused by sharp edges.
  • Aesthetic Appeal: Create a refined, professional finish.
  • Durability: Smoothed edges are less prone to chipping or cracking.

Materials You’ll Need

  • eQualle Sandpaper Sheets:
    • 220 grit: For initial edge smoothing.
    • 400 grit: For refining the surface.
    • 1000 grit: For polishing the edges.
  • Masking tape (to protect the surface).
  • Spray bottle with water (for wet sanding).
  • Gloves and safety goggles.

Step-by-Step Guide to Smoothing Glass or Mirror Edges

Step 1: Prepare the Glass or Mirror

Clean the glass or mirror thoroughly to remove any dust or debris. Use masking tape to cover and protect the surrounding surface, leaving only the edges exposed.

Step 2: Start with 220-Grit Sandpaper

Attach 220-grit sandpaper to a sanding block or fold it for handheld use. Wet the edge with water to reduce dust and friction. Sand along the edge in smooth, even strokes.

Step 3: Refine with 400-Grit Sandpaper

Switch to 400-grit sandpaper to refine the edges further. This step removes any remaining sharpness and creates a smoother finish. Keep the surface wet during this process.

Step 4: Polish with 1000-Grit Sandpaper

Use 1000-grit sandpaper for the final polishing. Sand gently in circular motions to achieve a glossy, professional edge. Make sure the edge is evenly polished for a consistent finish.

Step 5: Clean and Inspect

Wipe the edges with a damp cloth to remove any remaining residue. Inspect the glass or mirror for smoothness and repeat the process if necessary.

Safety Tips

  • Wear gloves and safety goggles to protect yourself from glass shards and dust.
  • Always wet sand glass to minimize heat and reduce airborne particles.
  • Work in a well-lit area to see the edges clearly.

Why Choose eQualle Sandpaper?

  • High Durability: Designed for consistent performance on tough surfaces.
  • Waterproof: Ideal for wet sanding applications.
  • Eco-Friendly: Made with recyclable materials.
  • Versatile: Suitable for glass, metal, wood, and more.
Previous article Polishing Resin Surfaces with Sandpaper Grit 1000

Leave a comment

Comments must be approved before appearing

* Required fields