Sanding Glass Edges with eQualle Sandpaper Sheets (150, 320, 600, 2000 Grits)

When cutting or shaping glass, the sharp edges left behind can be both dangerous and unattractive. By sanding with eQualle Sandpaper Sheets (9 x 11 inches), you can smooth glass edges safely and achieve a polished, professional look suitable for tables, shelves, or decorative pieces.

Why Sanding Matters for Glass Edges

Untreated glass edges are prone to chipping and can cause injury. Sanding removes sharpness, reduces breakage risk, and allows for decorative finishes like frosted edges or full polishing.

Essential Tools

• eQualle Sandpaper Sheets (9x11 in)
• Sanding block or foam pad
• Spray bottle with water (for wet sanding)
• Protective gloves and goggles
• Microfiber cloths

Recommended Grit Sequence

• 150 Grit (50-pack) — For rounding off sharp glass edges safely.
• 320 Grit (50-pack) — For refining and smoothing after coarse sanding.
• 600 Grit (25-pack) — For polishing and preparing glass edges for clarity.
• 2000 Grit (100-pack) — For ultra-smooth, crystal-clear polishing.

Step-by-Step Process

1. Secure the glass. Place it on a soft, stable surface to prevent cracking during sanding.
2. Round edges with 150 grit. Use wet sanding to reduce dust and prevent heat buildup.
3. Smooth with 320 grit. Refine the edge for an even, semi-polished look.
4. Polish with 600 grit. Wet sand until the edge begins to feel silky smooth.
5. Finish with 2000 grit. Achieve a clear, polished edge that shines like factory glass.
6. Clean thoroughly. Wipe with microfiber cloths to remove all sanding residue.

Special Cases

For frosted or decorative finishes, stop at 600 grit instead of 2000 to leave a soft, matte appearance on the edges.

Pro Tips

• Always wet sand glass to prevent cracking and control dust.
• Use gentle, even pressure to avoid chipping.
• Rotate the glass piece as you sand for uniform results.
• Replace sandpaper sheets frequently, as glass wears them down quickly.

Aftercare

• Clean glass with non-abrasive cleaners only.
• Avoid sudden temperature changes, which can stress edges.
• For decorative glass, re-sand with fine grits if scratches appear.

FAQs

• Can I sand tempered glass? Only lightly on the edges—avoid sanding surfaces, as tempered glass can shatter.
• Do I need power tools? No, hand sanding is safer and more controlled for glass edges.
• What grit gives a frosted look? Stopping at 600 grit leaves a matte, frosted finish.

Video Guide

For safe and stunning results, use eQualle Sandpaper Sheets (9x11 inches) when finishing glass edges. Browse our Super Fine Sanding Collection for more grit options.