eQualle Sandpaper Sheets for Restoring Wooden Desks (100–400 Grit Guide)

Wooden desks often accumulate scratches, stains, and worn finishes from years of use. eQualle 9x11 inch Wet/Dry Sandpaper Sheets provide the grit sequence needed to strip old coatings and smooth the surface for a refreshed finish.

Why Sanding Desks Matters

Desks are daily work surfaces that show wear quickly. Sanding removes imperfections and prepares the wood for stain, paint, or sealant. Without sanding, finishes may appear uneven or fail to bond properly.

Tools You’ll Need

• Orbital sander and sanding block
• Vacuum and tack cloth
• Dust mask and goggles
• Stain, paint, or clear coat
• eQualle Wet/Dry Sandpaper Sheets

Best Sandpaper Grits for Desk Restoration

• 100 Grit (25-pack) — Removes old varnish or paint layers.
• 150 Grit (50-pack) — Smooths rough wood after stripping.
• 220 Grit (100-pack) — Prepares surfaces for primer or stain.
• 400 Grit (25-pack) — Final sanding for silky, finish-ready surfaces.

Step-by-Step: Refinishing Wooden Desks

1. Prep the desk. Remove hardware, clean surfaces, and repair cracks if needed.
2. Sand with 100 grit. Strip old finishes and remove deep scratches.
3. Switch to 150 grit. Smooth uneven areas and refine the surface.
4. Move to 220 grit. Prepare bare wood for new coatings.
5. Finish with 400 grit. Lightly sand for a smooth, finish-ready feel.
6. Clean thoroughly. Vacuum dust and wipe with a tack cloth.
7. Apply finish. Stain, paint, or seal for a durable and refreshed look.

Special Cases

For veneered desks, avoid coarse grits below 100 to prevent sanding through. For solid hardwood desks, follow the full grit sequence for best results.

Pro Tips

• Always sand with the grain of the wood to avoid scratches.
• Test stain or paint on a small hidden area before finishing the entire desk.
• Replace sandpaper sheets often for consistent cutting performance.

Aftercare

• Clean desks with microfiber cloths to protect finishes.
• Use coasters and mats to prevent stains and scratches.
• Reapply protective finishes every few years for durability.

FAQs

• Do I need to sand the entire desk? Yes, for consistent finish adhesion.
• What grit is best before staining? 220 grit ensures even absorption.
• Can I hand sand instead of using a sander? Yes, but power sanders save time on large surfaces.

Watch & Learn

Bring new life to your workspace with eQualle Sandpaper Sheets (9x11 in, Wet or Dry). Explore the wood sanding collection for your next restoration project.