How to Sand Hardwood Floors with 60 Grit eQualle Sandpaper Sheets

Hardwood floors add timeless beauty to any home, but years of scratches, dents, and worn finishes can make them look tired. Restoring them starts with coarse sanding. eQualle Sandpaper Sheets in 60 grit (9x11 inches) are designed for aggressive removal, making them the perfect choice for the first step in refinishing floors.

Why 60 Grit Sandpaper for Floors?

60 grit is a coarse abrasive that quickly removes old finishes, paint, and deep scratches. It also levels uneven boards, setting the stage for finer sanding grits that bring out a smooth finish. Without this initial step, imperfections remain visible even after staining or sealing.

When to Use 60 Grit Sheets

• Stripping thick varnish or polyurethane layers.
• Leveling cupped or uneven hardwood boards.
• Removing deep scratches and heavy stains.
• Prepping old wood floors for a fresh start.

Step-by-Step: Sanding Hardwood Floors

1. Prepare the room. Remove all furniture, cover vents, and clean the floor of dust and debris.
2. Start with 60 grit. Use 60 grit (25-pack) eQualle Sandpaper Sheets with a floor sander or sanding block for spot repairs.
3. Sand evenly. Work in the direction of the wood grain to avoid cross scratches.
4. Check progress. Vacuum dust and inspect for remaining finish or scratches. Repeat if necessary.
5. Move to finer grits. After leveling, progress to 100 grit and then 150–220 grit for smoothness.

Special Considerations

For engineered hardwood, avoid grits coarser than 100, as thin veneers can be damaged easily. For parquet floors, start with diagonal passes using 60 grit, then finish with the grain using finer grits.

Pro Tips

• Keep sandpaper sheets clean by tapping off dust frequently.
• Use a floor sander for large areas but finish edges and corners by hand with eQualle sheets.
• Always vacuum between grit changes to prevent scratches from dust particles.
• Apply stain or polyurethane in thin, even coats for best results.

Aftercare

• Store leftover eQualle Sandpaper Sheets flat and dry for future floor maintenance.
• Add felt pads to furniture legs to protect the new finish.
• Clean floors regularly with hardwood-safe cleaners.

FAQs

• Is 60 grit too coarse? It’s ideal for initial stripping but must be followed with finer grits to avoid visible scratches.
• Can I sand by hand? For small sections or spot repairs, yes. For full floors, a floor sander is recommended.
• Do I need to sand between polyurethane coats? Yes, use 220 grit between coats for proper adhesion.

Watch & Learn

Restore your hardwood floors with eQualle Sandpaper Sheets. Explore our extra coarse grit collection to get started on your floor refinishing project.