Skip to content
Get Sample
Get Sample
eQualle Sandpaper Sheets

Preparing Metal Surfaces for Polishing with Sandpaper Grit 360

How to Prepare Metal Surfaces for Polishing Using Sandpaper Grit 360

Metal surfaces require careful preparation to achieve a polished and professional finish. Using Sandpaper Grit 360, you can refine metal surfaces, remove scratches, and prepare them for final polishing. Follow this step-by-step guide to get the best results.

Why Use Grit 360 for Metal?
  • Versatile: Suitable for smoothing and removing surface imperfections.
  • Prepares for Polishing: Creates an even surface ready for finer sanding.
Materials You’ll Need
  • Metal object or surface (e.g., tools, furniture, automotive parts).
  • Sandpaper Sheets:
    • 240 grit: For removing deeper scratches or oxidation.
    • 360 grit: For smoothing the surface.
    • 400 grit: For final preparation before polishing.
  • Sanding block or orbital sander.
  • Microfiber cloths for cleaning.
Step-by-Step Guide
Step 1: Clean the Metal

Wipe the metal surface with a microfiber cloth to remove dirt and grease.

Step 2: Remove Imperfections

Use 240-grit sandpaper to remove scratches, oxidation, or uneven areas.

Step 3: Smooth the Surface

Switch to 360-grit sandpaper to refine the surface and prepare it for polishing.

Step 4: Final Preparation

Use 400-grit sandpaper for a smooth, even surface ready for polishing.

Pro Tips for Metal Preparation
  • Use Wet Sanding: Reduces heat buildup and minimizes scratches.
  • Sand in One Direction: Creates a consistent surface for polishing.
  • Wear Safety Gear: Protect your eyes and hands from dust and debris.
Why Choose eQualle Sandpaper?
  • Durable: Perfect for metal preparation tasks.
  • Precise: Delivers smooth and professional results.
  • Eco-Friendly: Made with recyclable materials.
Previous article How to Smooth Wood for Staining with Sandpaper Grit 400
Next article Polishing Wood for a Glossy Finish with Sandpaper Grit 320

Leave a comment

Comments must be approved before appearing

* Required fields