Polishing Car Headlights with 800 Grit Sandpaper

Introduction

Foggy or yellowed headlights not only look bad but also reduce visibility at night. Restore them to crystal-clear condition with 800-grit sandpaper. This guide will walk you through the process step by step.

Why Use 800 Grit Sandpaper?

• Restores Clarity: Removes oxidation and light scratches.
• Safe for Plastic: Gentle enough for headlight lenses.
• Cost-Effective: Saves money compared to replacement.

Step-by-Step Guide

Step 1: Clean the Headlights

Wash the headlights with soap and water to remove dirt and debris.

Step 2: Wet Sand with 800 Grit

Dip 800-grit sandpaper in water and sand the surface in circular motions. Keep the surface wet to avoid heat buildup.

Step 3: Polish and Seal

Apply a headlight polish with a microfiber cloth. Finish with a UV sealant to protect against future oxidation.

Materials You’ll Need

• Foggy headlights to restore.
• eQualle Sandpaper Sheets:
  • 800 grit sandpaper for wet sanding.
• Soap, water, and microfiber cloths for cleaning and polishing.
• Headlight polish and UV sealant.

Why Choose eQualle Sandpaper?

• Effective: Designed for delicate plastic surfaces.
• Durable: Long-lasting and efficient.
• Eco-Friendly: Made from sustainable materials.