Skip to content
Get Sample
Get Sample
DIY Wooden Coasters

DIY Wooden Coasters

DIY Wooden Coasters: Step-by-Step Guide with eQualle Sandpaper

DIY Wooden Coasters: Step-by-Step Guide with eQualle Sandpaper

Introduction

Create your own personalized wooden coasters with this simple DIY project. Using eQualle 9x11" sandpaper sheets, you can sand and polish wood to achieve smooth, beautifully finished coasters. Perfect for gifts, decor, or everyday use!

Materials You’ll Need

  • Wood pieces cut into coaster-sized shapes (e.g., 4-inch squares or circles).
  • eQualle Sandpaper Sheets:
    • 80 grit: For initial shaping and smoothing rough edges.
    • 120 grit: For refining the surface.
    • 220 grit: For final smoothing.
    • 400 grit: For polishing to a fine finish.
  • A sanding block.
  • Wood stain or paint (optional).
  • Food-safe varnish or oil for finishing.
  • Gloves and a dust mask.

Step-by-Step Guide to Making Wooden Coasters

Step 1: Choose Your Wood

Select a durable type of wood like oak, maple, or cedar. Cut it into your desired coaster shape using a saw, or purchase pre-cut wooden blanks for convenience.

Step 2: Sand the Edges and Surface

Use 80-grit sandpaper to smooth rough edges and shape the coaster. Then, switch to

Previous article Polishing Resin Surfaces with Sandpaper Grit 1000

Leave a comment

Comments must be approved before appearing

* Required fields