Sanding a carbon fiber bicycle part is less about “making it shiny” and more about controlling the scratch pattern so the surface reads as one continuous material after finishing. The goal here is to prep for clear coat without cutting...
This guide shows how to wet sand orange peel before polishing on a carbon fiber hood using silicon carbide sheets for wet or dry use. The priority is a uniform scratch pattern—so move up only when the previous grit’s scratches...
carbon fiber hood projects can look “done” straight off the tool, but layer lines, edges, and small defects will telegraph through paint or clear if you don’t control the scratch pattern first. This guide shows a practical sanding plan to...
