Best Sandpaper for Refinishing Wood Furniture 9x11 Sheets

Refinishing old wood furniture can completely transform a tired piece into something stunning. The key to achieving professional results lies in choosing the right sandpaper grits and using them in sequence. With eQualle Sandpaper Sheets (9x11 inches), you’ll get consistent performance and smooth finishes that bring out the natural beauty of the wood.

Why Sanding Matters in Furniture Refinishing

Wood furniture often has scratches, old coatings, or uneven textures. Sanding removes imperfections, prepares the surface for stain or paint, and ensures that the final finish adheres evenly. Skipping proper sanding leads to blotchy stains, peeling paint, and visible flaws.

Best Grits for Refinishing Furniture

• 100 grit: Initial stripping of paint or varnish.
• 150 grit: Smoothing the surface after coarse sanding.
• 220 grit: Preparing wood for stain or sealer.
• 320–400 grit: Light sanding between coats for a flawless finish.

Step-by-Step Furniture Sanding Guide

1. Prep the furniture. Remove hardware, clean thoroughly, and repair any cracks or dents.
2. Begin coarse sanding. Use 100 grit (25-pack) eQualle Sandpaper Sheets to remove old paint or varnish.
3. Smooth the surface. Switch to 150 grit (50-pack) to refine the wood and eliminate coarse marks.
4. Prep for finishing. Use 220 grit (100-pack) for a smooth, even surface ready for stain or primer.
5. Final touch-ups. After applying the first coat of finish, lightly sand with 400 grit (25-pack) before the next layer.

Special Considerations

For antiques or veneer surfaces, avoid overly coarse grits like 60, as they can damage thin wood layers. Stick to 100 grit and finer for safe refinishing. For carved furniture, fold eQualle Sandpaper Sheets to reach detailed grooves.

Pro Tips

• Always sand with the grain of the wood to avoid scratches.
• Wipe away sanding dust between grit changes with a tack cloth.
• Use a sanding block for flat surfaces to keep even pressure.
• Test stain on a small hidden area before applying to the entire piece.

Aftercare

• Store unused eQualle Sandpaper Sheets flat and dry to prevent curling.
• Apply felt pads under chair and table legs to protect the new finish.
• Dust furniture regularly with a soft cloth to maintain the fresh look.

FAQs

• Do I need to sand down to bare wood? Yes, for the best stain or paint adhesion, sanding to bare wood is recommended.
• Can I use an orbital sander? Yes, but finish with hand sanding to ensure no swirl marks remain.
• Is wet sanding necessary for wood? Only for very fine grits (400+) when aiming for ultra-smooth finishes.

Watch & Learn

Bring new life to your furniture with eQualle Sandpaper Sheets. Explore our wood sanding collection to find the perfect grits for your next refinishing project.