Refinishing Doors with 120 Grit and 220 Grit Sandpaper Sheets

Wooden doors take a lot of wear—scratches, scuffs, and fading finishes can leave them looking old and neglected. Refinishing a door with the right sanding process can restore its beauty and extend its life. eQualle 9x11 inch sandpaper sheets (Wet or Dry) in 120 and 220 grits are perfect for the job.

Why Use 120 and 220 Grit Together?

120 grit sandpaper is coarse enough to strip old finishes and smooth imperfections, while 220 grit provides the fine finish needed before applying new stain, paint, or varnish. The two-step process ensures doors look professional and last longer.

Tools You’ll Need

• eQualle 120 Grit Sandpaper sheets (9x11 in, Wet or Dry)
• eQualle 220 Grit Sandpaper sheets (9x11 in, Wet or Dry)
• Sanding block or orbital sander
• Tack cloth or microfiber rag
• Vacuum with brush attachment
• Protective mask and safety glasses

Step-by-Step: Refinishing Doors

1. Remove hardware. Take off hinges, handles, and locks to make sanding easier.
2. Start with 120 grit. Use 120 grit (25-pack) to strip away old finishes and smooth dents.
3. Clean surface. Vacuum and wipe with a tack cloth to remove sanding dust.
4. Switch to 220 grit. Finish sanding with 220 grit (100-pack) for a silky, paint-ready surface.
5. Apply finish. Stain, paint, or seal the door to complete the refinishing process.

Special Cases

For exterior doors with heavy weather damage, start with 100 grit before moving to 120 and 220. For veneered doors, use light pressure to avoid sanding through the thin surface layer.

Pro Tips

• Always sand with the wood grain for best results.
• Replace sheets frequently—dull sandpaper reduces efficiency.
• For panel doors, cut sheets into smaller sections for edges and grooves.
• After applying finish, lightly sand between coats with 220 grit for smoothness.

Aftercare

• Allow stain or paint to cure fully before rehanging the door.
• Keep a set of 220 grit sheets for touch-ups and maintenance.
• Store unused sandpaper flat and dry to prevent curling.

FAQs

• Do I need to strip paint before sanding? For heavy layers, yes. For light finishes, sanding may be enough.
• Is 220 grit too fine for finishing? No—it’s the standard for prepping wood before final coatings.
• Can I sand by hand? Yes, though an orbital sander speeds up large flat surfaces.

Watch & Learn

Bring new life to your doors with eQualle 120 grit and 220 grit sandpaper sheets. Durable and versatile, they make refinishing projects simple. Shop door refinishing sandpaper today.