eQualle Sandpaper Sheets for Polishing Acrylic Surfaces (600–3000 Grit Guide)

Acrylic sheets, displays, and furniture can scratch easily, but they can also be restored to crystal clarity with the right sanding process. eQualle 9x11 inch Wet/Dry Sandpaper Sheets are perfect for progressively removing scratches and polishing acrylic to a glass-like finish.

Why Sanding Acrylic Works

Acrylic is softer than glass, making it prone to surface scratches. By sanding in gradual grit steps, you can remove damage layer by layer while preparing the surface for polishing compounds that restore full transparency.

Tools You’ll Need

• Sanding block or foam pad
• Spray bottle with water
• Microfiber cloths
• Acrylic polish or buffing compound
• eQualle Wet/Dry Sandpaper Sheets

Best Sandpaper Grits for Acrylic

• 600 Grit (50-pack) — Removes light scratches and surface haze.
• 1000 Grit (25-pack) — Refines scratches from coarse sanding.
• 2000 Grit (100-pack) — Smooths acrylic to a nearly polished finish.
• 3000 Grit (50-pack) — Ultra-fine sanding before polishing compound.

Step-by-Step: Restoring Acrylic Surfaces

1. Clean the acrylic. Wash with mild soap and water to remove dirt.
2. Start with 600 grit. Wet sand in straight motions over scratched areas.
3. Move to 1000 grit. Sand in the opposite direction to smooth scratches.
4. Switch to 2000 grit. Refine the surface for a satin-smooth finish.
5. Finish with 3000 grit. Use light pressure and water for glass-like clarity.
6. Polish. Apply acrylic polish with a microfiber cloth for maximum shine.

Special Cases

For deep scratches, start with 400 grit before moving into the sequence. For small surface scuffs, begin at 1000 grit to save time.

Pro Tips

• Always wet sand acrylic to prevent heat and melting.
• Work slowly—rushing can cause uneven polishing.
• Use alternating sanding directions between grits for uniform clarity.

Aftercare

• Clean acrylic with microfiber cloths only—avoid paper towels.
• Apply protective coatings to resist future scratches.
• Re-polish as needed to maintain transparency.

FAQs

• Can I use eQualle sandpaper on plexiglass? Yes, plexiglass and acrylic respond the same way to sanding and polishing.
• Is polishing compound required? Yes, it completes the process after fine sanding.
• Can I use power tools? Yes, but use low speeds to avoid overheating.

Watch & Learn

Restore clarity to acrylic projects with eQualle Sandpaper Sheets (9x11 in, Wet or Dry). Explore the super fine sanding collection for your next restoration.