eQualle Sandpaper Sheets for Drywall Patch Repairs (120–320 Grit Guide)

Small drywall repairs—like fixing nail holes, dents, or minor cracks—look seamless only when sanded correctly. eQualle 9x11 inch Wet/Dry Sandpaper Sheets provide the right grit range for blending patches into the surrounding wall, leaving a smooth, paint-ready surface.

Why Sanding Matters for Drywall Patches

Joint compound often leaves ridges, bumps, or uneven textures. Sanding levels these imperfections and ensures the patch disappears under paint. Without sanding, patched areas may remain visible even after multiple coats.

Tools You’ll Need

• Sanding block or pole sander
• Dust mask and safety glasses
• Work light to reveal imperfections
• Tack cloth or vacuum
• eQualle Wet/Dry Sandpaper Sheets

Best Sandpaper Grits for Drywall Patching

• 120 Grit (25-pack) — For shaping dried joint compound and removing ridges.
• 150 Grit (50-pack) — Smooths patched areas after initial sanding.
• 220 Grit (100-pack) — Blends patched areas into the surrounding wall.
• 320 Grit (25-pack) — Final finishing grit before primer and paint.

Step-by-Step: Sanding Drywall Patches

1. Inspect the patch. Shine a work light at an angle to highlight high spots or rough edges.
2. Start with 120 grit. Knock down ridges and smooth the compound surface.
3. Switch to 150 grit. Feather the patch edges into surrounding drywall.
4. Refine with 220 grit. Sand lightly for a paint-ready surface.
5. Finish with 320 grit. Use light strokes for a seamless final blend.
6. Clean thoroughly. Vacuum or wipe with tack cloth before priming.
7. Prime & paint. Apply primer to seal the surface, then paint to match the wall.

Special Cases

For ceiling patches, use a pole sander and lighter grits (150–220) to avoid gouging. For textured walls, sanding may be minimal—apply matching texture instead.

Pro Tips

• Always sand in a circular motion for smooth blending.
• Don’t oversand—too much pressure can expose drywall paper.
• Use wet sanding for dust-free work in small spaces.

Aftercare

• Let primer dry fully before applying topcoat.
• Inspect walls under bright light to catch missed imperfections.
• Keep leftover eQualle sheets flat and dry for future repairs.

FAQs

• Can I skip sanding for small nail holes? No, sanding ensures the patch blends invisibly.
• What grit is best before painting? 220–320 grit provides the smoothest paint-ready surface.
• Can I reuse sandpaper? Yes, if sheets are not clogged or worn out.

Watch & Learn

Make wall repairs disappear with eQualle Sandpaper Sheets (9x11 in, Wet or Dry). Shop the medium sanding collection for your next drywall project.