eQualle Sandpaper Sheets for Smoothing Epoxy River Tables (400–3000 Grit Guide)

Epoxy river tables combine wood and resin into stunning furniture pieces, but achieving a flawless finish requires progressive sanding. eQualle 9x11 inch Wet/Dry Sandpaper Sheets offer the grit range needed to smooth epoxy and wood seamlessly before polishing.

Why Sanding River Tables Matters

Freshly cured epoxy often contains bubbles, ridges, or uneven textures, while wood may have grain variations. Sanding levels both materials so they blend together, ensuring a glass-like final surface.

Tools You’ll Need

• Orbital sander and sanding block
• Spray bottle with water
• Microfiber cloths
• Polishing compound
• eQualle Wet/Dry Sandpaper Sheets

Best Sandpaper Grits for River Tables

• 400 Grit (25-pack) — Removes surface imperfections and flattens epoxy.
• 800 Grit (50-pack) — Smooths scratches left by coarse sanding.
• 1500 Grit (100-pack) — Prepares the surface for fine polishing.
• 3000 Grit (50-pack) — Final ultra-fine sanding before polishing for clarity.

Step-by-Step: Sanding Epoxy River Tables

1. Clean the surface. Remove dust and ensure epoxy is fully cured.
2. Start with 400 grit. Level out high spots and imperfections in resin and wood.
3. Switch to 800 grit. Wet sand to smooth sanding marks and unify surfaces.
4. Move to 1500 grit. Refine the epoxy and wood to near-polished smoothness.
5. Finish with 3000 grit. Sand lightly for a glass-like clarity.
6. Polish. Apply compound and buff for maximum gloss.

Special Cases

For deep imperfections, start at 220 grit before moving to 400. For softwoods combined with epoxy, use light pressure to prevent uneven sanding.

Pro Tips

• Always wet sand epoxy to avoid heat and clogging.
• Sand in overlapping motions for even leveling.
• Replace sheets often for consistent performance.

Aftercare

• Clean with non-abrasive cleaners to preserve shine.
• Re-polish periodically to maintain clarity.
• Protect tables with coasters and pads to avoid scratches.

FAQs

• Can I skip straight to 1500 grit? No, each step is needed to refine scratches from the previous grit.
• Is polishing compound required? Yes, it enhances clarity and shine after 3000 grit.
• Will sanding damage the wood? Not if you sand evenly across wood and epoxy together.

Watch & Learn

Bring out the brilliance in your epoxy projects with eQualle Sandpaper Sheets (9x11 in, Wet or Dry). Explore the super fine sanding collection for your next woodworking project.